Publicité
Les langues disponibles
Les langues disponibles
Fixations on the left-hand side
Fitting kit
- 4 BHc 6x20 screws
- 4 fitting brackets
- 4 Ø5 plastic washers
- 1 middle aluminium style part
Assembly
- Fit the brackets as indicated on the photos (the tightening torque wrench of the screws is 1 Nm/Kg).
- Put the silent blocks on both sides of the belly pan. The spacer is positioned with the collar to the outside.
- Assemble the belly pan with the middle aluminium style part by placing it at the inner sideand by fixing
with the provided screws, washers and M5 nuts.
- Fit the belly pan on the motorbike by using the BHc 6x20 screws.
- Aluminium nettings may be fitted at the air intakes level with silicone.
Once fitted, the belly pan must have no contact with motor and has to be far
enough from complet exhaust system. Fitting brackets' angles may be a little
modified in order to adjust the accessory to every motorbike (do not fold the
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of
our painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* Belly pans will be neither retaken nor exchanged in case of rubbing during a "sports" driving, or during the clearing of pavements, uneven road surfaces ... The fitting of Ermax accessories is planned for a normal road
use.
* Move hoses so that they do not fall inside the belly pans. Any deterioration due to flows of corrosive products is not guaranteed.
* Aluminium screws are garanted until 6 Nm by our suppliers. Care to excessive clampings which may damage or break screws.
- 4 "silent blocks" with steel spacers
- 4 BHc 5x10 screws
- 4 M5 nylock nuts
- 2 pieces of 5x10 cm aluminium nettings
fixing brackets while fitted on belly pan).
« CAUTION »
FITTING INSTRUCTIONS
"BELLY PAN"
CBF 125 2009 → ∞
With central stand
Fixation on the right-hand side
Publicité
