Ghost Looping Manuel page 17

Menu Description
Addr
Set Address
ChMd User Mode
SLMd
Operation Mode
SdMd Sound Mode
Auto Auto Mode
Sens Sound sensitivity 0 - 100
Led
Display Backlight On / Off
diSP Display Rotation
Pan Pan reverse
Tilt
Tilt reverse
Ver Firmware version Vxx
Rset Fixture reset
Addr - Setting of the DMX address:
Press MENU to select ADDR, press ENTER to start setting.
Use the UP or DOWN keys to set the desired Address. Then press ENTER to confirm.
ChMd - Selection of the channel mode:
Press MENU to select CHND. Press ENTER to start setting. Select the channel mode using the
UP OR DOWN keys: successively 16CH and 30CH. Press ENTER again to confirm the selection.
- 16CH: 16 Channel mode
- 30CH: 30 Channel mode
SLMd - Selection of operating mode
Press MENU to select SLMD. Then press ENTER to start setting. MAST, SL1, SL2 OR D512 will be dis-
played. Press UP OR DOWN to choose Master or slave, then press ENTER again to confirm your selection.
MAST: Choose the device as master, SL1 / SL2 : Choose the device as slave or D512: for DMX512 opera-
tion.
Sub-Menu Description
A001 - A512 Setting up a starting DMX address of the fixture
16 channel mode
16Ch / 30Ch
30 channel mode
Mast - Master mode
SL1 - Slave Mode synchronized
Mast / Sl 1 /
Sl 2 / D512
SL2 - Slave Mode desynchronized
D512 - DMX Mode
Sd1 - Sound Mode 1
Sd2 - Sound Mode 2
Sd 1 / Sd 2 /
Sd 3 / Sd 4
Sd3 - Sound Mode 3
Sd4 - Sound Mode 4
Aut1 - Auto Mode 1
Aut2 - Auto Mode 2
Aut1 - Aut4
Aut3 - Auto Mode 3
Aut4 - Auto Mode 4
Sound Sensitivty setting
On - backlight constantly on
Off - backlight off after 2 minutes
dISP - display UP
dISP / dSIP
dSIP - display DOWN
no - normal Pan movement
No / Yes
yES - reverse Pan movement
no - normal Tilt movement
No / Yes
yES - reverse Tilt movement
Firmware version display
Speed chase
Sp1 - Sp9
setting
Page 17