REBER 9340 N Notice D'utilisation Et Entretien page 59

Line: DE LUXE INOX
Steel casing.
Professional pump.
Professional vacuum gauge.
Automatic operation.
Adjustable welding time.
Air intake for container coupling.
Power 300W – 320W
Max. vacuum level -830 mbar / -900 mbar
Aspiration capacity 16 lt./min – 32 lt./min
COMPONENTS
1. Pump switch (ON/OFF)
2. Welding switch
3. Vacuum gauge
4. Cover
5. Vacuum chamber gasket
6. Vacuum chamber
Cod. 9706 N – 9706 NP – 9707 N
USE OF THE MACHINE
Cod. 9706 N VACUUM UNIT DE LUXE INOX
Cod. 9706 NP VACUUM UNIT DE LUXE INOX DOUBLE PISTON POMP
The machine permits the vacuum packaging conservation of food products, so as to extend
their conservation in time
Standard factory regulations provide a welding time of about 5 time/power units (suitable for
standard vacuum bags with 95/105 micron thickness), and automatic use.
SETTING THE MACHINE TO MANUAL/AUTOMATIC USE
To set the machine to manual use, proceed as described below:
Before connecting the plug to power supply, press and hold on pump switch (1);
Connect the plug to power supply;
Wait for at least 5 seconds;
Release the switch.
To set the machine to automatic use, proceed as described below:
Before connecting the plug to power supply, press and hold on welding switch (2);
Connect the plug to power supply;
Wait for at least 5 seconds;
Release the switch.
(This setting will last when unplugging the machine, until a new programming operation will
be made).
WELDING TIME SETTING
Proceed as described below to change welding time (these operations are to be made while
the machine is plugged in):
press and hold on welding switch (2);
wait at least for 5 seconds to enter programming mode;
press and release pump switch (1) as many times as the number of seconds you want to set
for welding operation (every press/release operation will add 1 time/power unit
release both switches (This setting will last when unplugging the machine, until a new
programming operation will be made).
IMPORTANT: we suggest not to set welding time over 15 time/power units.
7. Sealing bar
8. Air suction plug
9. Slide
10. Bar-pressing profile
11. Green LED ( 9707 N)
12. Red LED ( 9707 N)
59