Playback Delay Time; Operation; Display Mode; Storing Frequencies - DNT MusicFly Select Mode D'emploi

All manuals and user guides at all-guides.com

operation

on the display.( see also setup Setup frequency
automatically). After that, the radio can be tuned
to this frequency manually.
In the mode SYC the MusicFly Select scans for a
empty frequency automatically. After that, the unit
tunes the radio on that frequency via RDS.
The tuning to the new frequency may take a
couple of seconds. This depends on the tuning
speed of the radio.
The SYC mode is not suitable for all car radios.
The right mode must be found out.
Press the MENU/REPEAT-button briefl y 5 times.
Select the RDS mode with the
Setup playback delay time
Change the waiting time from the time auto scan is fi nished
and start of the playback.
Press the MENU/REPEAT-button briefl y 6 times.
Setup the delay with the

Display mode

This function is available, if an audio device is
connected to the usb port or a SD card is in the
slot.
Frequency Press and hold
seconds to switch the display mode.
remaining playback time

Storing frequencies

Select the desired frequency
Press briefl y the MEM SD-USB-button. The dis-
play shows [-].
/ -buttons.
/ -buttons.
-button during playback for 2
- 24 -