ENGLISH
1.)
Before starting, please read our assembling instructions carefully and make yourself familiar with them.
2.) follow our assembling instructions carefully.
3.) Compare the listed parts and fitting list to the contents of the cordboard.
4.) Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
in some way to difficulties during the assembling.
S.) To make sure that the furniture will not be damaged or grated during assembling, prepare an adequate area and
coyer the floor with the cardboards
6.) We recommend operating
7.) Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.) Keep the instruction and service sheets. Perhaps Vou will need them later on.
for wooden furniture consisting of glass and steel or MOf and coated surface:
Wooden Furniture: Stains con be taken off with a soft, moistened c10th or by using a special polish (available in
supermarket and specialized stores). But do not forget to wipe the surface with a dry and soft c10th afterwards.
Steel furniture:
The metal has a varnished surface. The material could show little discrepancies
machine made production
If some metal ports have been twisted out of shape during transport, Vou could carefully try to twist them into the
original position. Please do not overwind the screws and retight them from time to time.
MOF and coated surfaces:
MOf consists of wooden fibres (please read the a.m. instructions). Do not work on the coated surfaces with knives
or sharp objects, as this could cause damage the material.
Thot should not be a reason for complaints afterwards.
Due to machine made production,
standard sand paper. Please do it corefully in order to make sure that Vou will not remove too much of the material.
Carrying out the assembly is for adults only. Please, keep your children away during assembling. Children might
take small parts or fittings away or swallow them up. Ouring assembling it could olso happen thot ports of your
furniture fall down on your children. Please, therefore, protect them and make sure that you carry out the assembling
in their absence.
If your piece of furniture consists of glass, it should be handled corefully durÎng assembling. Glass con break at any
time and couse injuries. Therefore, Vou should protect your eyes and honds by wearing special c10thing and safety
shoes, available in the supermarkets and specialized stores.
We are not liable for any material damage or injuries resulting from faulty assembling. We are also not liable for
any damage resultant from lack of maintenance
liable for any damage caused by faufty use or use agoinst its purpose.
We wish Vou a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team by Inter link SAS
assembling suggestions:
Important
or another soft pad (i.e. cloth or carpet).
always with two or more people.
Maintenance advice:
which should not be a reason for a comp/aint.
the MOf parts can have sharp edges. You could chamfer them with a fine
Warn;ng:
during use. (i.e. retightening of screws, and etc ... ). We are not
Bad tools lead
in calour, c10uds or stains due to the
3/6