Hoover FLOORMATE Mode D'emploi page 11

FM-Candy final 17/6/03
4-6
F
Slide the two nozzle release latches
(F) outward.
4-9
While holding nozzle in place, slide
latches inward to lock in place.
4:54 PM Page 11
4-7
E
F
Remove nozzle (E) by pulling straight
out.
Rinse nozzle under running water.
Remove debris from squeegee (G)
and wipe with a damp cloth.
Storage
Before storing cleaner:
Turn cleaner OFF and disconnect
from power socket.
• Empty and rinse solution and recov-
ery tanks. Allow to air dry.
• Allow filter in recovery tank lid to
dry.
• Set the cleaner for "Dry Vacuuming"
(pedal to "DRY" and Wet Control
switch up).
• Make sure that nothing is pressing
on the nozzle squeegee.
• Do not store cleaner on a wood sur-
face unless cleaner is completely
dry.
4-8
H
G
To replace nozzle, make sure latches
are out.
Align middle section (H) of nozzle
with opening (I) on cleaner.
GB
I
Continued 11