habitat et jardin Troti 2 Guide Utilisateur page 8

LED Headlight:Press the Light button there will be a sign in display which indicates the light is
turned on. Press the button again, and the light will be turned off.
Mileage: There are three modes: total, trip and time. You can press the settings button to change it.
When it displays the 'trip' mode, press the setting button for 3 seconds and it will clear the mileage
and accumulate it again.
Rear break: Tread on the rear brake, and the front electronic magnetic brake and rear brake will be
simultaneously applied.
Riding
Choose a suitable place for riding.
Unfold the scooter.
Adjust the handlebars to the suitable height.
Press the power button to turn on the power.
Stand on foot on the scooter and leave another foot on the ground.
Gently press down the accelerator, the scooter will immediately move forward slowly. Place the
foot which is on the floor on the pedal after acceleration. Press the accelerator down, the greater
the angle you press, the faster it will be.
Brake
1.Under normal circumstances, pressing the electronic magnetic brake, the scooter will
immediately disconnect the power and then brake. The greater the angle you press, the greater the
braking force will be.
Charging
Please do not use the charger of other brands.
When you get the electric scooter for the first time, please charge the battery fully before using.
If it is not being used for a long time. Please charge the battery fully once every three months.
Open the charging port cover, connect the charger and the charging port.
Plug the charger in the power socket
When charger light is red, the battery is being charging; when the the charger light is green, the
battery is fully charged.