GreenWorks Elite ST-140-AT Guide D'utilisation page 14

ASSEMBLY
ATTACHING THE AUXILIARY HANDLE (See Figure 4.)
1. Press the auxiliary handle onto the power head shaft so that the handle is angled toward
the rear handle that allows for comfortable operation.
2. Slide the bolts through the holes in the auxiliary handle, and tighten them securely with a
Phillips Head screwdriver (not included).
LINE TRIMMING CUT-OFF BLADE (See Figure 5.)
The trimmer is equipped with a line trimming cut-off blade on the guard. Replace the string when
trimming efficiency diminishes. This will maintain best performance.
13
Fig. 4
CUT-OFF BLADE
Fig. 5