Commissioning; Battery Mode - REV Ritter JY-229 Instructions De Montage Et D'utilisation

Commissioning

!
Connect the mains power unit with the monitor (9V; 800mA).
!
Finally plug in the connector of the power unit into the 230V
socket. The monitor can also be operated with batteries (6 x
type "AA").
!
Switch on the monitor with the operation switch (7). The
status display lights.
!
Set the channel on both the monitor and camera - see
Settings.
!
Take away the battery or the power supply unit if you don´t
use the device over a long time.

Battery mode

Monitor
1. Remove the cover of the battery case at the backside of the
Monitor by using a srew driver
2. Insert the batteries according the polarity into the battery
case (6 x 1,5 V Typ AA)
3. Put on the cover of the battery case
22