ORCA 18 RGBW(A)
CONNECTION DIAGRAM WITHOUT IP CONNECTOR
CONSTANT VOLTAGE
4 x 0,75mm
TTR Cable
Junction Box (IP67)
4 x 2,5mm TTR Cable
(Minimum recommended)
*The signal cables must be connected color to color or (number to number ) otherwise the product led colors will work asynchronous.
No more than
12 fixtures on a
single DMX 512 link,
max. 100 m total
(source to last fixture)
You can connect
multiple fixtures
Data cabling from DMX
source to first fixture and
PC
between subsequent Orca 18
fixtures shall be Cat5e UTP
or higher (stranded type only)
or other cable type suitable
for DMX communication.
Consult DMX standard for
additional guidance.
DMX
Controller
DMX
Signal Cable
Decoder
Connection Detail
V+
R-
Wago 221-415 or equivalent
Line can be continue...
G-
B-