Operation Steps - Ibx ULTR Serie Manuel Utilisateur

3. Operation

Operation steps:

Before operating your cleaner
Start ultrasonic cleaning
1. Add cleaning liquid
Fill the tank with warm or tap water below the maximum line;
Add the required quantity of cleaning solution. When using flammable liquid such
as alcohol, gasoline and so on, heating is strictly forbidden! Ultrasonic vibration for
a long time can cause temperature of liquid increase, caution fire!
2. Turn on the power switch
Plug the cleaner into a grounded outlet. Turn on the power switch on the back of the
tank.
("O" is closed, and "I" is open)
For the first boot, time display show setting time at random, press time key+ one
time, ''the setting time'' on the display will be increase by 1 minute
correspondingly, touch time key- to decrease time setting by 1 minute. Touch
ON/OFF switch after you have properly set the time, ultrasonic indicator will turn
red and the machine will start working based on the parameters set. Meanwhile
the timer will begin to count down and stop working when the time shows "00:00",
automatically.
5