Placing The Splash Guard; Switching The Kitchen Mixer On - Wartmann WM-1906 MX Mode D'emploi

The Wartmann kitchen mixer must be placed in the resting position
®
to attach a hook.
EN
The whisk, beater or dough hook must be attached to the rotating
spindle of the Wartmann kitchen mixer. Put the hook on the spindle
®
and press carefully, then turn the hook 45 degrees clockwise to secure
it in its place. To remove the hook carefully press it upwards and turn
it 45 degrees anti-clockwise to release it from its place.

Placing the splash guard

Place the round part of the splash guard on top of the bowl. The hook
should fall in the middle opening of the splash guard. Now place the
second part of the splash guard above the opening in the round part
with the fill-opening pointing upwards. The sliding strips on the side of
the second part should fall into the slots of the round part.
2
1
A properly placed splash guard has a fill-opening that can be used to
fill the bowl with liquids and small ingredients.

Switching the kitchen mixer on

Check that the rotating knob is in the "Off" position. Put the power
plug in a power socket that has an earth wire. The Wartmann kitchen
®
mixer is now ready for use.
12