Control Panel - Carbest 70440 Manuel D'utilisation

UK
Do not connect the microwave oven to more than a single power source at
any given time. It will not operate. After connecting your microwave to a single
power source, the unit will beep to let you know it is ready for use, displaying
zeros in the display window. The microwave oven is now ready for operation.
For DC operation be sure to maintain correct polarity. The microwave will
not operate with reverse polarity.To rectify, simply connect using correct
polarity. Red al-ligator clip to positive (+) battery post and black alligator clip
to negative (-) battery post.
Some foreign cars and trucks employ a positive ground design. The
microwave will not operate using a positive ground connection. If in doubt,
consult with your vehicle's dealer.
When connecting to an automobile, small truck, boat or van, the engine
should be running in order to prevent discharge of the battery to a point
where the vehicle will not start. Connect the alligator clips to the vehicle's
battery, start the engine and operate the microwave.To disconnect the
microwave, shut off the engine and remove the alligator clips from the
battery. Do not connect or disconnect the alligator clips when the engine is
running.
When connecting to large trucks, motor homes or buses the unit may be used
without running the engine.
CAUTION: NOT FOR USE IN AIRCRAFT.

CONTROL PANEL

CAUTION: Do not place any objects on the door while it is open, damage to
the door sealing surfaces may result.
Carbest Mobile Microwelle |Microwave | 70440
Countdown cooking timer
(20 MIN. MAX.)
BUTTON - Cook-Time
BUTTON - Preset cooking time
BUTTON - Preset cooking time
BUTTON - Preset cooking time
BUTTON - Start/Stop
Oven Controll + Child safety
Opening the oven door.
Pull forward to open the door
16