Maintenance / Cleaning - Singer SteamWorks Classic Manuel D'instructions

STEP 1
Turn off the unit and unplug it. Wait for at least
30mins until unit cools down completely.
OFF


STEP 1
Turn off and unplug the unit and cool for at least
30mins. Remove Water Tank. Mix water and
vinegar solution and pour into water reservoir.
Water
50%
Vinegar
Maintenance & Cleaning
Remove Mineral Build-Up
50%
STEP 2
Unscrew Drain Plug and empty water reservoir.
Collapse and remove the Telescopic Pole and
Steam Nozzle.

STEP 2
Wait 40mins, unscrew Drain Plug and drain the
water reservoir. Pour clean water in reservoir
and let it drain. After reservoir is empty, replace
Water Tank and tighten the Drain Plug.
Clean water
40
minutes

Attention: Screw in
Drain Plug after water
reservoir is empty.
Make sure Drain Plug
is in place and tight-
ened before each use.
ENGLISH – 7