Samsung DV456 Serie Mode D'emploi page 22

installing your dryer
10. Remove the holder-glass.
11. Change position with each other.
: Cover-hinge to handle-door
: holder-hinge to guider-holder
glass
12. Remove the hinge-door and then
assemble on the opposite side.
Picture for you reference the
process of assemble.
13. Remove the cover-hole(P1).
14. Assemble the holder glass and then fasten the 14 screws
that removed in step 9.
15. Attach the cover-hole.
Spare cover-hole into assy manual.
16. Install the door on the frame-front and then fasten the 4
screws that removed in step 2.
Check position of screw that installed to hinge door.
22_ installing your dryer
DV400-03170A_EN_HUDSON-PJT_v1.indd Sec3:22 DV400-03170A_EN_HUDSON-PJT_v1.indd Sec3:22
L
2012-01-20 2012-01-20
P
1:58:30 1:58:30