Ebode BT Sound BTR30 Guide Utilisateur page 6

Sound. If you want to remove the BT Sound from the Bluetooth® list, turn off the BT Sound
by pressing the On / Off button till you hear a beep and the blue indicator light flashes
twice. Then remove the 'ebode BT Sound' from the list with Bluetooth® devices on your
Bluetooth® Device. You can do this via the instructions from the manual of your Bluetooth®
device.
Reconnect the paired BT Sound with the Bluetooth® Device
If you want to reconnect the paired BT Sound with the Bluetooth® Device, follow these
steps: Press the on/off button on the BT Sound until you hear a beep. Usually when your
Bluetooth® device and the BT Sound are both on and within range, they will connect
automatically.
Playing music
When you are listening to the music, you can press the play/pause button to play music or
make a pause.
Volume control
Press the Volume Control ( ) to increase volume and release when it reaches your
preferred volume. Vice versa!
Previous/Next Song
Briefly press the button to go to next song and to go to the previous song.
Using the BT Sound as a Headset
Answering a call when the BT Sound is used as Headset
When you hear the ring tone, press the On/Off button once. If you prefer answering the
call by your phone, that's possible too. You will still hear the call on your headset.
Ending a call
Press and release the On/Off button once or end the call on your phone's keypad.
Answering or rejecting a call when listening to music
If there is an incoming call when you are listening to music, press the On/Off button to
answer the call. Or press and hold the On/Off button for approximately 2 seconds until you
hear a beep, to reject the call.
Pause or put a call on hold
During the phone call, just press and hold the On/Off button for 2 seconds to put a call on
hold. If you want to continue the call, you can also press and hold the On/Off button for 2
seconds. Please note it may take up to 4 seconds before you can restart your
conversation. This is subject to the mobile phone's feature. (Unfortunately not all phones
support this feature)
Redialling the previous call
Press and hold the On/Off button for approximately 2 seconds until you hear a long beep.
Questions? Please visit our website www.ebodeelectronics.eu
for FAQ and our contact details.
15-5-2012 6 ebode BTR30