Assembly Instruction - PowerSmith PWL1115BS Manuel D'utilisation

ASSEMBLY INSTRUCTION

ATTACHING WORK LIGHT HEAD TO STAND (FIG 1)
1. Place the stand (9) on a flat surface.
2. Position the U-Shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1.
3. Use the locking knob (6), flat washer and spring washer to secure the work light head on the stand.
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30° down or 90° up.
To Adjust the Light Direction,
retighten knobs.
ON/OFF SWITCH
Your portable work light is equipped with an ON/OFF switch (7) locate on the back side of the work light. Press the
switch once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off
before unplugging.
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand and tripod.
WARNING:
completely cool before attempting to clean it.
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
For questions about this or any other PowerSmith™ product,
888-552-8665.
Please call Toll-Free:
www.powersmithtools.com
Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
English
OPERATION
loosen the side locking knobs (5). Adjust the work light head to desired position, and
MAINTENANCE
Always make sure the work light is unplugged and
WARRANTY
HELP LINE
4