Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
3 V - 12 V Universal Power Supply
1
Safety instructions
The user manual is part of the product and contains important information for correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the
product.
•
Keep this user manual.
Notes for network separation
The product has no power switch and may be used only in easily accessible outlets to
quickly remove it in an emergency and after use.
Voltage-free only with pulled plug.
•
In case of emergency, during thunderstorms and after use, pull the product on its
plug housing!
•
Do not open the housing.
•
Do not modify product and accessories.
•
Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must be protected against further
use.
•
Use product, product parts and accessories only in perfect condition.
•
Do not repair defective products yourself, but contact the dealer or the manufac-
turer.
Not meant for children. The product is not a toy!
•
Secure packaging, small parts and insulation against accidental use.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves,
vibrations and mechanical pressure.
2
Description and function
2.1 Product
This product is a universal, environmentally friendly and stabilised power supply unit for
IT and office equipment. It has exchangeable adapter plugs for many common devices.
The output voltage can be variably adjusted.
2.2 Scope of delivery
3 V - 12 V Universal Power Supply, adapter plugs, USB connector (only for 59029),
adjusting tool, user manual
2.3 Operating Elements
1 Housing
2 Operation LED
3 Output voltage adjuster
4 DC socket
2.4 Specifications
Article number
59029
Connections
Euro plug (type C, CEE 7/16), DC socket (universell, 2-Pin)
100-240 V
Input
3.0 V
4.5 V
5.0 V
Outputs
6.0 V
7.5 V
9.0 V
12.0 V
Average active
efficiency
Efficiency at low load
(10 %)
No-load power
consumption
Jack plugs
3.50 x 1.35 mm
4.00 x 1.70 mm
5.00 x 2.10 mm
DC adapter plugs
5.50 x 1.50 mm
5.50 x 2.10 mm
5.50 x 2.50 mm
USB adapter plug
USB 2.0
Dimensions (LxWxH)
83.8 x 44.5 x 50.2 mm
Cable length
Weight
158.0 g
REV2020-11-02
V1.0aw
Subject to change without notice.
5 Euro plug
6 Adjusting tool
7 Adapter plugs
8 USB connector (only for 59029)
59032
59033
, 50/60 Hz,
100-240 V
0.8 A max.
0.5 A max.
, 1.5 A, 4.50 W
3.0 V
, 1.0 A, 3.0 W
, 1.5 A, 6.75 W
4.5 V
, 1.0 A, 4.5 W
, 1.5 A, 7.50 W
5.0 V
, 1.0 A, 5.0 W
, 1.5 A, 9.00 W
6.0 V
, 1.0 A, 6.0 W
, 1.5 A, 11.25 W
7.5 V
, 1.0 A, 7.5 W
, 1.5 A, 13.50 W
9.0 V
, 1.0 A, 9.0 W
, 1.5 A, 18.00 W
12.0 V
, 1.0 A, 12.0 W
77.8 %
77.9 %
69.1 %
70.99 %
0.10 W
0.09 W
2.5 mm
3.5 mm
3.50 x 1.35 mm
5.00 x 2.10 mm
5.50 x 1.50 mm
5.50 x 2.50 mm
-
79.4 x 40.5 x 49.1 mm
1,8 m
138.0 g
109.5 g
3
Intended use
We do not permit using the device in other ways like described in chapter
"Description and Function" or in the "Safety Instructions". Use the product only
in dry interior rooms. Not attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to persons and property.
4
Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of product, power supply and peripherals. These must
be identical.
5
Connection and operation
CAUTION!
•
Route the cable safely.
1. Check the required voltage on the rating label of the IT or office equipment to be
connected.
2. Use the adjusting tool to set the output voltage of the power supply according to
the device's rating label.
3. Select the appropriate adapter plug.
4. Connect the adapter plug to the power supply with the correct polarity.
Most devices work with positive polarity, i.e. with the positive pole at the inner con-
tact.
5. Connect the IT or office device to the power supply.
6. Plug the power supply into a free and easily accessible socket.
The operation LED lights up as soon as voltage is applied on the input side.
During operation no control elements need to be used.
7. Disconnect all connections after use.
6
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents or chemicals.
•
Store the product out the reach of children and in a dry and dust-protected am-
bience when not in use.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
7
Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
, 50/60 Hz,
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection points – pa-
per belongs in paper bins, plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
8
EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH
ensures, that the product is conformed to the basic European standards and
directives.
9
Symbols used
For indoor use only
Alternating current
Direct current
Recycling
- 2 -
59029, 59032, 59033
Risk of injury by stumbling and falling
Material damage
IEC 60417- 5957
IEC 60417- 5032
IEC 60417- 5031
ISO 7001 - PI PF 066
by Wentronic GmbH | Pillmanstraße 12
38112 Braunschweig | Germany
Goobay®
Publicité
