Tips And Troubleshooting - My Sodapop Sharon UP Mode D'emploi

TIPS AND TROUBLESHOOTING

Always carbonate COLD water.
1. If your mySodapop machine does not carbonate::
• Make sure you are pressing the carbonating button down as far
as possible in short sharp bursts.
• If the cylinder is empty, exchange it for a full one.
• Check that the carbonating bottle has been filled up to the fill line.
2. If, when fitting a new cylinder, gas leaks after you have screwed it
in the machine:
• Screw the cylinder tighter into its holder. If this doesn´t help,
remove the cylinder and re-screw it into the machine as described
on p. 36 CO2 cylinder installation.
3. If water overflows from the carbonating bottle during carbonation:
• Check if you have over -filled the carbonating bottle.
• Check the fill line and remove excess water if necessary.
• Are you pressing the carbonating button too long? Use short, firm
presses only.
If you have any more questions or queries, please contact your
local customer care team.
42