Operating The Monitor - Legamaster 65" CTD Manuel

4  Operating the monitor
The side controller of the monitor
 OSD Key Pad function List
Key Description
Power Power on/Power off
Source Source selection (toggle)

Menu Right/Volume +

Menu Left/Volume -
Menu Up

Menu Down
Menu/Exit Menu/Exit selection
 LED ON:
Power Status Condition
Green Power on
Orange Power off
Power saving mode
Select LED on via menu
(Front LED: On)
Off AC off
Power on
Select LED on via menu
(Front LED: Off)
 LED OFF:
The LED turns completely off when in the "off" mode
regardless of the monitor being on or off.
The Remote Control (RCU) Instructions
No Function Description
1 Turns the monitor on and off
2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Selects the PC DVI source (only 55")
HDMI 1 Selects the HDMI source 1
4 COMP 1 Selects the Component source
AV 1 (VIDEO 1) Selects the Composite Video source
HDMI 2 Selects the HDMI source 2
5 COMP 2 Not available in this model
AV 2 (VIDEO 2) Not available in this model
6 PIP
S-V
HD-SDI 2
7 SWAP
8 P-SOURCE
9 MENU
, , , 
10 EXIT
11 ENTER
12 SCALING
FREEZE
MUTE
BRIGHT
Power ON-Stand
by Indicator
CONTRAST
AUTO
Remote Control
Receiver
SOURCE
VOLUME-
VOLUME+
 Hot Key: OSD Menu Lock/Unlock Control
Lock: Press Enter, Enter, Exit, Exit, Enter
and Exit on the controller by sequence
and OSD will be locked.
Unlock: Press Enter, Enter, Exit, Exit, Enter
and Exit on the controller by sequence
and OSD will be unlocked.
Display Mode
Turning the monitor on
1. Correctly insert the power cord into monitor and into
the power outlet.
2. Ensure the AC switch is set to "—".
3. Press the power button on the remote or side control panel.
Turning the monitor off
With the power on, press the power button on the remote or
side control panel to put the monitor in a standby mode. To turn
off power completely, turn the AC switch to " " or disconnect
the AC power cord from the power outlet.
NOTE:
If there is no signal input for a period of time, the monitor will
automatically go to standby mode.
Turns the PIP feature
on and off
2
Selects the S-Video
source
Not available in this
4
model
Swaps the main
source & sub source
6
picture
7
Selects the secondary
sub-source
9
Opens the monitor's
11
on-screen menu
system.
When the menu
system is already
open, pressing this
button will select the
previous submenu
Navigates through
submenus and
settings
Closes the menu
system
Selects highlighted
menu choices
Toggles between different aspect ratios
(Auto, Native, 4x3, 16x9, 16x10 and Letterbox)
Freezes the current source image
Turns off the sound
Adjusts the brightness
Adjusts the contrast
Synchronizes the monitor to the source
Allows selection of the different sources
Decreases the sound volume
Increases the sound volume
1
3
5
8
10
12
5