Package Contents - Oceanstar GRS1514 Manuel D'utilisation

Garment Rack with Adjustable Shelves
A.
B.
Shelf x 3
Top poles (with pole cap
and threaded pole connector
attached) x 4
C
I
STEP 1.
Attach the wheels (I) onto the bottom poles
(C). (The locking wheels must be on the same end.
Securely tighten all 4 sides.)
B
C
STEP 5.
Connect the top poles (B) with the attached
threaded pole connectors into the bottom poles (C) until
tightened.
1.
Two adults are recommended for ease of assembly. Use care when handing.
2.
Assembly recommended on a soft surface, such as carpet, to avoid scratching flooring finish.
3.
Discard the black circular plastic pieces. These are used to separate the shelves for shipping purpose.

Package Contents

C. D.
Bottom Poles x 4 Tapered sleeves x 28
spare tapered sleeves x 2
C
D
STEP 2.
With the arrow on the tapered sleeves (D)
pointing up, snap the two halves together onto the pole
(C) at the desired height. (Make sure (D) is installed on
the same grooved lines on each pole)
E
D
STEP 6.
Repeat step 2 to assemble the hook
bracket(E).
E. F.
Hook Bracket x 1
Hang Rod x 1
C
A
STEP 3.
Slide bottom shelf (A) down to where the
tapered sleeves (D) are set on the pole and firmly push
the shelf so it covers most of (D). (The lips on the shelves
should be facing down).
A
D
STEP 7.
Repeat steps 2 and 3 to assemble the third
shelf(A).
Item# GRS1514
G. H.
L Type Brackets x 2 Head Screws x 2
A
D
A
STEP 4.
Repeat steps 2 and 3 to assemble the second
shelf (A).
G
H
F
STEP 8.
Attach the L-Type Brackets (G) to the hang
rod (F) with the head screw (H). Then hang onto the top
shelf.
CAUTION: Do not allow children to climb or play in or
around the shelves.
I.
Wheels x 4
(2 locking, 2 non-locking)