Control Panel - ECOHOUZING FS40-13VR Guide D'utilisation

7. Mount the front guard and join both guards together using the clips.
(Step 7 see Fig. 7)
Fig. 5
OPERATING INSTRUCTIONS
I. CONTROL PANEL
On the control panel , there are five keys to operate
the fan . (See Fig.8)
- Power Key
Once plugged in, pressing this key will turn the fan on, and
pressing it again will turn the fan off.
- Wind Speed Key
When the fan starts, pressing this key will change
the wind speed in the order of "1-2-3-4-5-6."
- Wind Mode Key
This key is provided to select air supply mode,
and if it is pressed repeatedly, wind type will
change cyclically in the sequence of "Normal
wind - Natural wind - Sleep wind - Smart wind".
A corresponding indicator on the screen will
display the current fan mode. The four wind
modes have the following features:
Normal wind: The fan will deliver wind constantly according to the wind speed level
set by the wind speed key. There are six speeds.
Natural wind: The fan will simulate natural wind
according to the pre-set program, and the delivered wind speed will change based
on the program, making users feel fresh and natural. There are three speeds.
Sleep wind: The fan will simulate natural wind according to the pre-set program with
three wind speeds. The delivered wind is light and soft.
Smart wind: Based on current fan speed and room temperature when this mode is
selected, the fan speed can automatically increase or decrease one setting if room
temperature increase or decrease 0.5℃, until maximum or minimum fan speed
achieved.
Fig. 6
4
Clip
Fig. 7
Fig. 8
Timer
Wind Speed
TOUCH KEY
8 hours timer
Normal wind
6 speed setting
Oscillating
DISPLAY
Wind Mode
ON / OFF
Oscillation
Sleep wind
Natural wind
Smart wind