S&P KSTA-SIL Instructions De Montage Et D'utilisation page 5

3. insTAllATion
The complete cabinet must fit on a horizontal support, through the lateral holes planned for that.
It is recommended to use anti vibrating mounts and flexible couplings to connect the unit to the ducts.
Hereafter the different possible layout:
intake operation:
extract operation:
Fastening of the accessories:
Damper and rectangular or circular couplings are fitted to the main casing with 4 HM8X20 screws.
The acoustic casing is fitted to the main casing with 4 fasteners located on each side.
We recommend to use longitudinal feet fitting them at the juncture of the two casings (see the drawing below).
A 4 longitudinal feet kit can be order for the KSTV/A units, but 2 longitudinal feet are supplied with the acoustic casing.
Acoustic
casing
5
Acoustic
casing
Sistema de
Fastener
cierre