Function And Usage Method Of This Device; Use The Matters Needing Attention - Hypercable HYC-540 Manuel De L'utilisateur

According to the below picture to set the relevant operation, that can be change the
Transmitter parameters through the control panel.

Function and Usage Method of this device:

1> Forexample, equipment power system frequency from 2405MHz to 2440MHz
2> Long press "
of the first parameter is black character shading, press "
of modify the parameters.
3> Press " "or "
stepping by 1MHz , until to the required numerical.
4> Adjusted to the required data, long press "
character shading disappear, on the LCD display show "Success" it indicates that the
adjustment has been finished, other parameters setting method, please refer to the above
method.
5> If you don't want to save the parameters, lightly press "
modification the exit parameters setting mode, return to normal display interface.
The master need to connect the computer, the slave need to connect the webcam. If no
problem please open your IE browser and enter your Webcam address.
Then you can got amazing video.
Remark:
LED display frequency range is decided by Transmitter working frequency, Transmitter
frequency must consistent with Receiver frequency.

Use the matters needing attention:

1> Before power on the device, must be check the antenna interface whether is load,
in order to avoid antenna interface short circuit or open circuit.
Note: Before the device is switched on the power, the device should be first connect
with antenna then connect with the power supply, removal of device should be
first turn off the power. If you use the device, first switched on the power, connect
antenna later, it may cause the device damage.
2>Antenna selection, should be selected according to the use of the frequency band.If you want for
long distance transmission, choose the directional antenna to improve the system gain.
HYPERCABLE sarl 74 Avenue Paul Sabatier ZA de la Coupe 11.100 Narbonne Tel : +33 (0) 4 68 70 91 75 - Fax : 04 68 70 91 76
Mail : info@hypercable.fr - N° SIRET : 384 007 894 00031 – Code TVA CEE: FR90384007894 -
" key and keep 3 seconds, enter setting state,
" to adjust numerical of the parameters, at this time LCD is adjusted
at this time LCD screen
"or" " move to the position
" key and keep 3 seconds, black
"button, give up to
www.hypercable.fr