Defrost; Stopping Your Product; Bottle Holder - Beko BLSA210M3S Notice D'utilisation

Masquer les pouces Voir aussi pour BLSA210M3S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Defrost

The fridge compartment defrosts
automatically.
The thawing water flows through the
drain channel into a collection
container at the rear of the device.
During defrosting, water droplets form
at the back of the fridge due to the
evaporator.
If not all of the drops run down, they
may freeze again after defrosting
remove them with a cloth soaked in
warm water, but never with a hard or
sharp object.
Check the flow of the thawed water
from time to time. It may become
plugged occasionally.

Stopping your product

If your thermostat is equipped with
"0" position:
- Your product will stop operating
when you turn the thermostat button
to "0" (zero) position. Your product will
not start unless to you turn the
thermostat button to position "1" or
one of the other positions again.
If your thermostat is equipped with
"min" position:
- Unplug your product to stop it.

Bottle holder

This accessory can be used for
storing bottles or cans side by side.
13
EN

Publicité

Table des Matières
loading

Table des Matières