Self Clean - Samsung WF56H9110C Série Manuel D'utilisation

selF Clean+

Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the power button.
2. Press the self clean+ button.
• Once the Self Clean+ button is pressed, the
3. Press the start/pause button.
• When you press the Start/Pause button, Self
• Using Self Clean+, you can clean the drum without using a cleansing agent.
cauTion
• Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
• If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder-type cleansing agent, remove the liquid detergent compartment.)
The self clean+ auto indicator function
• If the "self clean+" button is lit after a wash, it indicates that
tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by running Self Clean+.
• If you do not run Self Clean+ the "self clean+" indicator
turns off after one hour. However, the "self clean+"
indicator will light again after five washes. We strongly
recommend you run Self Clean+ when the indicator lights.
However, not running Self Clean+ will not prevent the
washer from running.
• Although the Self Clean+ Auto Indicator appears once
a month or so, the frequency may differ depending on the number of times the washing
machine is used. In most cases, the Self Clean+ indicator lights after every 40 washes.
(USER)WF56H9110-03404B_EN.indd 31
only function that can be set is Delay End.
Clean+ begins.
English _31
2014/10/13 16:08:42