Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
a
Quick start guide
Automatic Lead Acid
Charger
For more information see the extended manual
online: ned.is/bacch02
Intended use
The Nedis BACCH02 is a charger for 2, 6 and 12 V lead-acid
rechargeable batteries.
This product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
This product is intended for use in household environments for
typical housekeeping functions that may also be used by non-expert
users for typical housekeeping functions, such as: shops, offices
other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
Before using the charger, check the instruction manual supplied with
the battery for the correct operation instructions.
Specifications
Product
Article number
Dimensions (l x w x h)
Weight
Input voltage
Output voltage
Capacity
Charging voltage
Charging time
Charging current
Polarity
Power consumption
Operating humidity
Operating temperature
Storage humidity
Storage temperature
Temperature while charging
Main parts (image A)
1
Polarity indicator LED
2
Charge indicator LED
3
Power cable
BACCH02_MAN_COMP_0520_print_(20245 1422)_v00.05.indd 4
BACCH02_MAN_COMP_0520_print_(20245 1422)_v00.05.indd 4
BACCH02
Automatic Lead Acid Charger
BACCH02
100 x 71 x 58 mm
710 g
230 VAC ; 50 Hz
2.3, 6.9 and 13.8 VDC lead-acid
rechargeable batteries
8, 10 or 7 Ah
2, 6 or 12 VDC
14, 17, or 12 hours
Max. 600 mA ; depending on
the condition and capacity of
the battery.
Red (+) ; Black (-)
22 W
10 % - 90 %
0 °C - 35 °C
5 % - 95 %
-10 °C - 55 °C
Max. 75 °C
4
Voltage slider
5
Red battery clamp (+)
6
Black battery clamp (-)
Safety instructions
WARNING
-
•
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep this
document for future reference.
•
Only use the product as described in this document.
•
Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
•
Do not drop the product and avoid bumping.
•
Do not use a damaged or defective product, but return it for
repair or replacement.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
•
Unplug the product from the power source and other equipment
if problems occur.
•
Make sure the power cable is positioned in a way that prevents
tripping or falling.
•
Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
•
Do not leave a battery on prolonged charge when not in use.
•
Disconnect the power supply before making or breaking the
connections to the battery.
•
Do not let the power cable touch hot surfaces.
•
Do not expose the product to direct sunlight, naked flames or
heat.
•
Do not immerse the product in water for cleaning.
•
Do not expose the product to water or moisture.
•
Stop the charging process if the product gets too warm (> 75 °C).
•
Only power the product with the voltage corresponding to the
markings on the product.
•
Wipe the battery terminals with a clean dry cloth if they are dirty.
•
During charging, the battery must be placed in a well-ventilated
area.
•
Non-rechargeable batteries are not to be recharged.
•
Do not short-circuit a battery.
•
When the product is not in use, disconnect it and store in a safe,
dry place, out of reach from children.
•
Children of less than 8 years should be kept away.
•
Cleaning and user maintenance shall not be done by children
without supervision.
Charging the battery (image B)
Make sure to match the charger voltage to the voltage on the
-
battery markings. Wrong voltage can destroy the charger and/
or battery.
-
Always keep the wires away from the battery and fuel line.
4
The security circuit ensures that there is no voltage at the battery
clamps when there is no battery connected.
4
The battery recharging time is variable depending on the
condition and capacity of the battery.
4
1. Slide the voltage slider A
4
The charging voltage varies per battery. Check the markings on
the battery for the correct charging voltage.
4
Make sure to match the (+) and (-) polarity markings.
2. Connect the red battery clamp (+) A
the battery.
3. Connect the black battery clamp (-) A
the battery.
4. Connect the power cable A
5. If the polarity indicator LED A
are not connected correctly. To fix this, follow these steps:
3
a. Unplug A
from the power outlet.
5
b. Reconnect A
and/or A
3
c. Connect A
to a power outlet.
4
Charging starts automatically.
2
The charge indicator LED A
4
to the correct charging voltage.
5
to the (+) terminal of
6
to the (-) terminal of
3
to a power outlet.
1
5
6
lights up red, A
and/or A
6
.
lights up.
18-05-2020 10:47
18-05-2020 10:47
Publicité
Table des Matières
