Uebler P22-S Notice De Montage Et D'utilisation page 14

Mounting bicycles for the 3rd-bicycle extension kit
Note
Mount heavy bicycles close to the vehicle and light bicycles
(e.g. children's bikes) further out on the bicycle rack.
Mount the first bicycle with the toothed gear wheel facing
the vehicle.
26 2
26
25
1
1. Mount the first two bicycles, see Mounting and Operating
Instructions of the bicycle rack P22-S/P32-S.
Attention
Only attach the bracket (2) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such a s gear or brake cables.
Faulty clamps must be replaced immediately.
2. Position the third bicycle in a manner similar to the first bicycle
and secure it with bracket (2) from the second to the third
bicycle at a suitable location.
3. Tighten the clamp (26) with the twist grip (25),
lock it with the key (1), and remove the key (1).
4. Tighten the lashing straps, see the Mounting and Operating
Instructions of the bicycle rack P22-S/P32-S.
Mounting bicycles for the 4th-bicycle extension kit
Note
Mount heavy bicycles close to the vehicle and light bicycles
(e.g. children's bikes) further out on the bicycle rack.
Mount the first bicycle with the toothed gear wheel facing
the vehicle.
25
1
26
M+P-25A-0152
1. Mount the first three bicycles, see Mounting and Operating
Instructions of the bicycle rack P22-S/P32-S.
Attention
Only attach the bracket (17) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such a s gear or brake cables.
Faulty clamps must be replaced immediately.
2. Position the fourth bicycle like the first and fasten at a suitable
location with the bracket (17) from the third bicycle to the fourth
bicycle.
3. Tighten the clamp (26) with the twist grip (25),
lock it with the key (1), and remove the key (1).
4. Tighten the lashing straps, see the Mounting and Operating
Instructions of the bicycle rack P22-S/P32-S.
Removing bicycles
The bikes are removed in the reverse order.
- 12 -
17
M+P-25A-0150