Bluetooth Mode - volkano Sports Titane Série Manuel D'instructions

• Please ensure that the battery is fully charged before using the device for
the first time.
• Connect the provided USB Charge Cable to the Micro USB Charging Input,
connect the other end of the USB to a wall charger or an available USB port on
your PC or laptop.
• The LED Indicator Light flashes red while charging.
• When charging is complete, the LED Indicator Light will stop flashing.
• Switching the earphones On: Press and hold the Play / Pause / Call Button for
3 – 5 seconds.
The LED Light will slowly flash blue when powered on and then enter Bluetooth
Pairing Mode when the LED Light flashes red-blue alternately.
• Switching the earphones Off: Press and hold the Play / Pause / Call Button for
3 – 5 seconds.
The Earphones must be paired to a Bluetooth device before it can be used. It is only
necessary to pair the Earphones once with each device.
Please switch on your Earphones before attempting to pair it to the device.
When Switched on, the Earphones will automatically enter Bluetooth Mode.
1. Open the Bluetooth Menu on the device you wish to pair (see "Locating the
Bluetooth Menu" for more details). Some devices require you to select "Search for
Devices" or Add New Device" in order to create a Bluetooth pairing.
2. Wait till you see "Titanium Sports" on your device screen
3. Select "Titanium Sports" on your device and follow any further prompts to pair.
Once pairing is complete and a connection is established, the Earphones will emit
a voice prompt and the LED Light will flash blue every 5 seconds indicating that
the Earphones are successfully connected.
INSTRUCTIONS FOR USE:
CHARGING
SWITCHING ON THE EARPHONES

BLUETOOTH MODE

PAIRING WITH BLUETOOTH DEVICES
4