Sonnenkonig ECO 500 Mode D'emploi page 45

4� 5� 6�
EN
4� Make sure that your smartphone is connected to the WLAN and
then enter the security phrase or password of your WIFI router
5� Check again that the WIFI symbol on the display of the infrared wall
heater flashes quickly and check the box before pressing again�
6� Wait until the connection status shows 100%� Give the device a
name so you can assign it later�
Troubleshooting
If no connection could be established after the time has elapsed, switch
off the device, switch it on again after some time, check the points men-
tioned below and try again�
- Is your device and smartphone near the router?
- Does your WLAN signal have the necessary 2�4 GHz frequency?
- Is your router already overloaded with other WLAN devices?
Reset WIFI settings
To reset the WIFI settings on the device, press and hold the WIFI button
until the WIFI symbol flashes slowly� Press the button again until the
symbol flashes quickly again� The WIFI module is now back in the fac-
tory settings�
45