Operating Your New Appliance - Breville the Smart Grinder Pro BCG820BSSXL Manuel D'instructions

oPERAtInG yoUR nEW APPLIAnCE

GRIndER ovERvIEW
Your Smart Grinder™ Pro uses hardened
stainless steel concial burrs to grind whole
bean coffee suitable for a range of brewing
methods, from the finest setting for espresso
to the coarsest setting for press. You are able
to select the amount of shots or cups with a
single button. The grind amount (dose) for all
coffee types is controlled by a digital timer.
The default dose for each brew method can be
adjusted by turning the Grind Amount Dial
and changing the time the grinder will run.
Once you have the desired dose, you can press
and hold the PROGRAM button to set your
custom time. You can grind directly into
a portafilter, grinds container or drip coffee
filter basket.
BEfoRE fIRSt USE
Remove and safely discard all promotional
labels and packing materials attached to your
Breville product.
Wash hopper, cradles, grind container,
container lid and cleaning brush in warm
soapy water and dry thoroughly. Wipe
exterior of grinder with a soft damp cloth and
dry thoroughly. Place grinder on flat level
surface and plug power cord into 120V outlet.
EnERGy SAvInG fEAtURE
The grinder will automatically switch
off if not used for 5 minutes.
To reactivate the machine whilst in
POWER SAVING/SLEEP MODE, press
any button on the grinder control panel.
notE
If bean hopper has not been locked
into position, 'PLEASE LOCK HOPPER'
message will be displayed on the LCD
screen disabling the operation of the
grinder for safety.
10
ASSEMBLInG yoUR BREvILLE
SMARt GRIndER™ PRo
Bean Hopper
Align tabs on the base of the bean hopper
and insert hopper into position. Turn the
bean hopper dial 90° to lock into position.
Fill with fresh coffee beans and secure lid
on top of bean hopper.
The bean hopper can be removed by turning
dial anti clockwise and lifting hopper to pull
out. The locking system allows you to remove
and transfer beans in the hopper to a storage
container safely.
Within each brew method (espresso, percolator,
drip or press), there is a range of grind size
settings. Between each brew method the grind
size settings will differ. This is due to each
method requiring different grind sizes for
optimum extraction.
Experiment with different grind size settings
by rotating the Grind Size dial to achieve the
brew that best suits your taste.
GRIND AMOUNT SHOTS CUPS START PAUSE
PROGRAM CANCEL
oPERAtInG yoUR nEW APPLIAnCE
GRIndInG foR ESPRESSo CoffEE
Use single wall filter baskets when grinding
fresh coffee beans. Use the finer 1–30 settings
in the ESPRESSO range.
StEP 1:
Insert the appropriate portafilter cradle size.
Insert your portafilter into the cradle.
CRADLES
50-54mm
PUSH
58mm
notE
You can change the amount already
selected during operation by pressing
the SHOTS|CUPS button. Maximum
number of shots with the cradle
inserted is 2.
StEP 2:
Selecting your SHotS|CUPS
Select the desired amount of ground coffee
required by pressing the SHOTS|CUPS button.
GRIND AMOUNT SHOTS CUPS START PAUSE
PROGRAM CANCEL
Continue pressing the SHOTS|CUPS button
until desired amount is displayed.
The maximum number of shots or cups for
each brew method is shown in the coffee chart
over page. The amount dispensed will vary
depending on the brew method selected and
the grind amount.
Rotate the Grind Amount Dial to adjust the
grinding time to achieve the correct amount of
coffee. Increasing time will increase the dose
and decreasing the time will decrease the dose.
GRIND AMOUNT SHOTS CUPS START PAUSE
PROGRAM CANCEL
11