Mute; Automatic Switch-Off; Ipod ® Playback (Using Optional Edock) - CUBO Sonoro Mode D'emploi

9. To end the function, press
indicator at the bottom of the display disappears.
10. Then press MENu again to confirm your selection.

6.7 Mute

During audio playback, press the SNOOzE button to mute the sound. Push the button again to
turn the sound back on. Mute will appear on the display. While the device is set to Mute, all the
other buttons do not function.

6.8 Automatic switch-off

1. While the device is in operation, press
pears on the display.
2. After pressing the
of minutes after which the device is to switch off automatically.
3. Use the Off setting to deactivate the function.
4. Confirm your choice by pressing
®
7. iPod playback (using optional eDock)
Connect the eDock to your cubo, as described in the eDock operating manual.
Whilst the device is switched on, use the MODE button to select iPod
on the display. If no eDock or no iPod
Press the PLAY button to start or stop playback (Pause). The function of the SkIP buttons is
similar to that of CD playback in iPod
higher level of your iPod
the Skip buttons navigate through the individual levels of the iPod
your selection. If no entry is made within 6 seconds, your cubo will switch back to normal
iPod ® mode. The eDock of course also works with the iPhone, although to do this it has to be
switched to Airplane mode.
For details regarding the operation of your iPod
MENu twice and then press SkIP FORWARD repeatedly until the
MENu and then SkIP repeatedly until SLEEP ap-
MENu button again, you can use the volume controls to set the number
MENu.
® is connected, the display will indicate "NO IPOD".
®
mode. Use the STOP button to get to the respective
® (iPod ® not supplied); the display will indicate MENU. In this case
® , the PLAY button confirms
® , please consult your iPod
® mode. IPOD is shown
® operating manual.
13