Technical Details - Hella 10 Automatic Notice D'emploi

Operating
Instructions for
Hella Baffery
Charger
(Hella Charger 10
Automatic)
Hella Part Number 8ES 004 417-...
1.0 General
1.1 Only 12 V batteries up to a maximum
of 100 Ah, e.g. motorvehicle, boat, starter
batteries and batteries for hedge cutters,
grass cutters etc. can be charged.
1.2 Charge batteries in well-ventilated
areas only (explosive gas can be emitted
from battery during charging —risk of
explosion).
1.3 To protect the Battery Charger:
• Keep splash water away from it and
keep the ventilating slits free during
charging.
• Do not place it on a heated surface, nor
in a damp room.
• The work lamp is meant for use when
the charger is in operation only.

2.0 Technical details

Rated charging curreu..
5/7 A average, for 8/10 A effective
Mains voltage:
230 V + 10%, 50 Hz
Power consumption:
115 W/ 168 W
Schnellladung:
(7A: 10 min/10min)
Type of protection:
IP 30
GS/ TUV-approved
Degree of radio interference:
N to DIN 0875
Automatic cut-out:
Protection against overload, reversed
polarity and short-circuit.
Weight:
2.5 kg
Charging characteristic:
Wa, e
Housing:
impact-resistant,
selt-extir plastic with 2 cable comp.
Work lamp:
5 W bulb and switch
7