Sennheiser Communications UI 760 Notice D'emploi page 8

UI_760.book Seite 4 Freitag, 30. Januar 2009 11:52 11
Connecting the headset to the UI 760
A Connect the RJ11 4/4 plug of the adapter cable to the
HEADSET socket until it locks in place.
Connecting the dictaphone to the UI 760
B Connect the 3.5 mm jack plug of the dictaphone
connecting cable to the
side until it locks in place. Connect the 3.5 mm jack
plugs to the outputs of your dictaphone device.
Connecting the handset to the UI 760
C Pull the RJ11 4/4 plug of the handset cable out of the
telephone and connect it to the
locks in place.
Connecting the telephone to the UI 760
D Connect one of the two RJ11 4/4 plugs of the supplied
telephone connecting cable to the
locks in place. Connect the second RJ11 4/4 plug to the
handset socket on your telephone.
4
JACK socket at the UI 760 front
HANDSET
PHONE
socket until it
socket until it