Cleaning And Care - Genius S20 Mode D'emploi

Decommissioning
In order to switch off the device, press the ON/OFF switch until only the red LED
„
lights up or blinks. Then pull the plug from the outlet.
When cooling down, place the device on a surface that cannot be damaged by
„
the remaining moisture of the cleaning base or the microfiber pad. Let the
device cool down completely.
Empty the water tank and let it dry out completely before you attach it back on
„
to the main device.
Let the device cool down sufficiently before you remove the microfiber wiper.
„
You can wind the cable around the two designated hooks to save space during
„
storage.

Cleaning and care

WARNING!
Risk of electric shock
Switch off the device before cleaning or user maintenance and disconnect it from the power network.
Never place the device under flowing water and do not submerse in water or other liquids.
Clean the device by wiping it with a moist towel.
Do not use any sharp or abrasive cleaning agents or cleaning pads.
Store the device in a dry, cool location protected against the sun and outside of the reach of children and animals.
The microfiber cloth can be washed at 60°C. Do not use any bleach or softener.
Instruction manual
GB
25