Leica TCPS27 Mode D'emploi page 14

Operation
Setup TCPS27S
As a pair
Configuration
TCPS27_008
TCPS27B and TCPS27R can be used directly as a wireless data connection with
Leica Geosystems equipment and computers.
Baud rates of the TCPS27B and TCPS27R must be the same. Baud rates set in the
TCPS27's must be equal to the serial connection rates. Link numbers in the
TCPS27B and TCPS27R must be the same.
These configurations can be viewed and edited using the TCPS configu-
ration tool.
TCPS27
Connect the TCPS27S with a PWM
sensor cable to the machine computer.
When the standard TCPS27 is
a
connected to the instrument, the green
b
"LINK (PW)" LED lights up on both radio
transmitters.
c The red "DATA" LED lights up as soon as
data is being sent or received.
a) Machine computer
b) TCPS27S
c) PWM sensor cable
2-3