Charging Instructions - Magellan Ledwood Mode D'emploi

PRODUCT OVERVIEW
When charging the charging case, the red indicator starts
flashing, it stops flashing when the charge is complete.
When charging headphones,
the blue light is on and the headphones are full of lights.
OPERATION INSTRUCTION
1.POWER ON
Automatic start and matching when you remove the headphone from the charging case.
2. WIRELESS PAIRING
1 Take out the earphones from the charging case, both earphones will flash in blue.
2 Wait until one LED light is off and the other keeps flashing, activate the Bluetooth function
on your device.
3 After searched, select "MAGELLAN" in the device list on the device.
4 Earphones connected successfully

3. CHARGING INSTRUCTIONS

When charging the charging case, the red indicator starts flashing, it stops when the charge
is complete. When charging headphones, the blue LED is always bright and full of extinction.
4.POWER OFF
Power off by putting the earphones into the charging case and close the charging case. Or
long press 5s to power off.
4
5.CALL
Touch 1 time L or R ear .....answer calls
Touch 1 time L or R ear .....hang up calls
Long press 2s L or R ear ...reject calls
6.MUSIC
Touch 1 time L or R ear .....play
Touch 1 time L or R ear .....pause
Touch 2 times right ear .....next song
Touch 2 times left ear .......previous song
Touch 3 times L or R ear ...vocal assistant
TROUBLE SHOOTING
Wireless pair and connection fail
Other cell phone or equipment has been connected before connection, and has not left yet
and cannot be switched off. When connection feature is employed again, the wireless unit
will automatically search for this equipment for connection. First turn off the wireless feature
of equipment and the next equipment can search, pair and connect normally.
Wireless may be normally connected and played, but sometimes, there is interrupted
1 There is a barrier between device phone and earphone, please clear it away.
2 The distance between the unit and connected device is too far away, out of normal connec-
tion range. Please put them nearer.
3 The battery of earphones is discharged, please recharge it.
RESUME FACTORY SETTING
Take the earphones out of the charging case and touch control continually for more than 8
seconds, then put the earphones back into the charging case.
5