Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OUT 24Vac
Fig. 02
Close the housing by proceeding in the
reverse order to that described above.
6.1.2
Installation in VERSO and
VERSO COMPACT housings
Open the housing and place the power
supply (03) in the proper seat.
Fix the power supply to the body of the housing
using the corner support bracket (01) and
the screws (02) provided for this purpose.
Insert the 6 poles connector at the end of
the cable (04) in the corresponding socket
identified by J5, on the support circuit (05).
Connect the power supply to the terminal
identified by J3 on the support circuit (05).
Connect the 24Vac power supply of the camera to
the terminal identified by J1 on the support circuit.
IN 230Vac
OUT 230Vac
04
Fig. 03
Mounting on VERSO housing.
04
Fig. 04
Mounting on VERSO COMPACT housing.
OUT 24Vac
J1
J5
Fig. 05
Electronic board mounting on VERSO housing.
OUT 24Vac
J1
J5
Fig. 06
Electronic board mounting on
VERSO COMPACT housing.
Close the housing by proceeding in the
reverse order to that described above.
01
02
03
05
01
02
03
05
IN 115/230Vac
OUT
115/230Vac
J3
IN 115/230Vac
OUT
115/230Vac
J3
3
Publicité
Table des Matières
