Denver SHA-150 Manuel D'utilisation page 8

The RFID tag can be used to disarm the alarm system.
This is done by holding it up against the keypad. (you
can only disarm this way, not arm)
The smartest & easiest way to use DENVER SHA-150 is
with this smartphone app, and the alarm system on
Wi-Fi, but It is possible to use the alarm system with
SMS commands or phone call as well. Instructions to
do this can be found in the full manual, available on
our website. Please enter denver.eu and use the search
function to find SHA-150.
Here you can find the full manual in English.
If you by any means need to reset the control panel this
is done by pushing the connection button 5 times
within 5 seconds, after turning on the control panel.
This will set it back to factory default. (Please notice
that all pairing with sensors and accessories are also
deleted then. Please check the full manual to see how
to add sensors again.
Please notice - All products are subject to change
without any notice. We take reservations for errors and
omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
ENG 6