Operations; Button Control; Sos - Cellularline GPS SAFE Manuel D'utilisation

S A F E G P S t r A c k E r

5. OPERATIONS

5.1 Button control

Button Operation Outcome
Turns ON or OFF the GPS
Press down the Power
Power
button for 2 seconds . SAFE .
1 . Activates quick-dial to
the Admin phone .
Press down the Call 2. Answers a call when the
Call
button for 2 seconds . GPS SAFE rings .
3 . Hangs up a call after it is
answered.
Activates the SOS alert.
The SOS alert can be
Press down the SOS-

SOS

de-activated by pressing
button for 2 seconds .
either the Call or Power
button .
1 . R emove the battery .
2. Press down both
Call + Power buttons
simultaneously,
Call + Resets the device back to
andthen insert the
Power factory defaults .
battery back in. Do
not let go of the
buttons before the
battery is inserted .
5.2 SOS
SOS function
To send out a SOS alert:
1. Press down the SOS button for 2 seconds to activate
SOS alarm.
2 . When it is activated, the GREEN/RED power LEDs and
BLUE GPS LED will stay on.
3. The device will then start an alerting/warning sound.
4. GPS will start getting a fix of where you are.
5. SOS alerts will be submitted to all the SOS phone
26
numbers that are previously defined before a GPS fix
has been determined, and will be re-submitted again
when a fix has been acquired.
6. Once SOS alerts are submitted, the GPS SAFE will
start calling SOS phone numbers based on priorities
configured. If one phone number cannot be reached
within 2 minutes, the GPS SAFE will proceed with the
next phone number in priority and so on .
7. Before the SOS emergency is cleared, the GPS SAFE
will repeat steps 5 and 6 based on the SOS interval
(once every 15 mins by default) as needed .
Note:
1. Click on the URL shown in the SMS message, and you'll
see a map indicating your current position.
2. A service charge may be incurred by clicking on the
URL in the SMS message depending on your data plan
subscribed. Contact your mobile service provider for
more details.
How to dismiss a SOS alert:
1. The SOS alert will be dismissed automatically after the
call is answered and finished.
2. Press the Power or Call button once on the GPS SAFE
will dismiss the SOS alert.
3 . Send out a message containing the command
"Dismiss" (excluding the quotes) from the Admin
phone will also dismiss the SOS alert.
4 . Click on "Dismiss SOS" on ITC, and the SOS alert will be
dismissed upon the next connection of the GPS SAFE
and Tracking Center .
Important: This device operates using radio signals, wire-
less networks, landline networks, and user-programmed
functions. Connections in all conditions cannot be guar-
anteed. You should never rely solely on any wireless device
for essential communications like medical emergencies.
5.3 Call
To make a quick-dial:
1. Press down the Call button for 2 seconds, and the GPS
SAFE will enable the quick-dial to the Admin phone.
2 . The RED/GREEN power LED and BLUE GPS LED will
stay on while a call is being made.
3 . After pressing the Call button, a telecommunication car-
rier tone will appear, indicating a call is being attempted.
4. Once the call is answered, you can then push the Call
or Power button to hang up and finish the call.
To answer a call coming in the GPS SAFE:
1 . When GSM is enabled, the GPS SAFE is capable of re-
ceiving calls made from the Admin/SOS phone num-
ber previously defined.
2 . When the GPS SAFE rings, simply press the Call button
to answer the call.
3. Once the call is answered, you can then push the Call
button again to hang up and finish the call.
Note: Calls that are not made from the Admin or SOS
phone numbers will not come through, and nor will the
GPS SAFE ring.
5.4 Audio Surveillance
To start audio surveillance on the GPS SAFE, you may:
1 . Send a SMS message including "Listen" as the mes-
sage content from the Admin phone to the GPS SAFE .
2 . Afters the SMS message is received, the GPS SAFE will
return a call back to the Admin phone automatically
and silently without alerting the owner.
3. In the meanwhile, the speaker of the GPS SAFE is
muted while the MIC is amplified.
4. This surveillance call will be ended automatically in 30
minutes by default .
5. Consequently, the speaker and MIC will go back to
normal state .
S A F E G P S t r A c k E r
5.5 Report
To report device position:
1 . Send a SMS message from the Admin phone to the
GPS SAFE including "Position" as the message con-
tent .
2 . After the SMS message is received, the GPS SAFE will
start obtaining a fix and report its position details
back to the Admin phone via SMS .
IT
EN
FR
ES
DE