Publicité
Adjust Procedure
1
J
Adjust the rotational
resistance at the joint
3
Don't adjust this unless
the gas arm is horizontal
K
Adjust here for different
monitor Weight Capacity
-Tilt Adjustment Screws
Note:Please adjust this screw
to adjust the tighten or untighten
the head.
-This screw is needed to be
used when adjusting the "Tilt"
angle for the screws
-If heavy screen is installed,
please adjust the tilt angle
before adding the
screens.
2
Adjust this according
to monitor weight
4
www.multibrackets.com
Monitor remove
Monitor remove
L
Publicité
