Monacor CU-48DMX Notice D'installation page 7

Masquer les pouces Voir aussi pour CU-48DMX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Indication
1cH
2cH
3cH
4cH
(factory setting)
To save the setting, keep any button pressed until the display
stops flashing and indicates the DMX start address .
2 . DMX start address: Keep the button "0-5" (a) pressed for
2  seconds until the address starts flashing . Use the buttons
(a, b, c) to set the address . The address will be automatically
saved as soon as the display stops flashing .
3 . PWM frequency and control curve: Keep the buttons "0-5" (a)
and "0-9" (c) pressed for 2 seconds until
Button
0-5
(a)
0-9
(c)
To save the setting, keep any button pressed until the display
stops flashing and indicates the DMX start address .
When the settings have been made, the DMX controller can be
used to adjust the brightness of the LED strips and, in case of
RGB (W) LED strips, to additionally set their colour .
5 Specifications
Data protocol: . . . . . . . . . .DMX 512
Number of DMX channels: selectable; 1, 2, 3 or 4 channels
Current rating: . . . . . . . . . .8 A for each output
Operating voltage: . . . . . . .12 – 36 V (⎓), depending on the LED
Power consumption: . . . . .32 .5 A max .
Dimensions (W × H × D): . .165 × 32 × 60 mm
Weight : . . . . . . . . . . . . . .400 g
Connections
DMX: . . . . . . . . . . . . . . .RJ45
LED strips: . . . . . . . . . . . . .screw terminals
Subject to technical modification .
All rights reserved by MONACOR
instruction manual may be reproduced in any form or by any means for any com-
mercial use.
Assignment of outputs CH 1 – 4
1
DMX channel (start address)  CH 1 – 4
st
1
DMX channel  CH 1 + 3; 2
st
1
DMX channel  CH 1 + 4
st
2
DMX channel  CH 2; 3
nd
1
DMX ch.  CH 1 (red); 2
st
3
DMX ch.  CH 3 (blue); 4
rd
Indication
Setting
1 – c
PWM frequency = 1.5 kHz (factory setting)
2 – c
PWM frequency = 0.2 kHz
P – 1
Control curve = logarithmic
P – 2
Control curve = linear (factory setting)
strips connected
2 adapter cables (RJ 45 to 3-pole XLR)
are supplied
INTERNATIONAL GmbH & Co. KG. No part of this
®
DMX channel  CH 2 + 4
nd
DMX channel  CH 3
rd
DMX ch.  CH 2 (green)
nd
DMX ch.  CH 4 (white)
th
starts flashing .
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0388290

Table des Matières