Publicité
Les langues disponibles
Les langues disponibles
The appliance is set by default to
enter standby mode after 15 minutes
of non-use.
Press the ON/OFF button to exit the
standby mode.
The coffee volume of the small cup is set by default
for a flow of approximately 25 seconds. Follow the
steps below to change the factory setting.
Place a cup on the drip grid, insert the capsule
adapter. Press and hold the small cup button.
Release once the desired volume is reached. The
new level of coffee volume is stored.
Programmable flow time: 10 to 90 seconds.
To cancel the default standby, unplug
the power cord from the wall outlet.
Press the small cup and large cup
buttons simultaneously, then plug the
power cord into the wall outlet.
The ON/OFF button lights up, release
your fingers. Press the small cup
button, the indicator light on the
small cup button switch off; the
pre-set standby mode is cancelled.
To reactivate the default standby
mode, do the same.
11
Publicité
