Wps; Wps (Pbc Mode) Configuration - Atlantis NetFly UP WN Guide D'installation Rapide

5.6 WPS

WPS is a set of specifications (supported by 802.11n draft) that will help you to
configure your network easily.
It exists 2 ways to use WPS: PBC (Push Button Configuration) mode and PIN mode.

WPS (PBC Mode) Configuration

Following, is possible to find a procedure to configure a wireless secure connection by
WPS (PCB Mode):
 Click on PBC button to start sincronization process between AP and client.
 Press PCB button on AP.
Before starting procedure, be sure that:
 There isn't any AP in WPS mode active.
 Access Point that are in WPS mode have finished its scan
for devices.
For more informations:
http://www.wi-fi.org/files/kc_80_20070104_Introducing_Wi-
Fi_Protected_Setup.pdf
http://www.wi-fi.org/files/wp_18_20070108_Wi-
Fi_Protected_Setup_WP_FINAL.pdf
52