multipipe RiO QUANTUM 22-23006 Guide Rapide page 7

First power up sequence
Please note:
For easier installation, please make sure you have already added other devices to your ZigBee network, such as
Underfloor Heating Control Box (22-23013) or Radiator heads (TRV's) etc.
1
To power on the Thermostat you
have to connect it to the 230V power
then...
4
Now, choose your language by
„ " or „ " buttons. Confirm
your language by button.
2
...display will show all icons...
5
3
...then thermostat will display
the software version.
YES - ONLINE, OFFLINE MODE.
You can configure your thermostat
with universal gateway or CO10RF
coordinator. That is, add it to the Salus
Smart Home system.
NO - STANDALONE.
Thermostat work as a standalone device
for pump, boiler, receivers etc. That is, you
can directly connect thermostat to selected
device without any network system. You
can add it later anytime.
7