Bugatti Vapor ELITE Mode D'emploi page 6

INSTALL/REMOVE POD
1. To install the pod, simply insert pod into device cavity with mouthpiece facing outward.
The pod is unidirectional. The magnet will hold the pod in place.
2. To remove the pod, pull straight outward.
LIQUID FILLING
1. Remove the pod and invert.
2. Inject your favorite Bugatti liquid by pressing the dropper
firmly through the injection hole valve and filling.
3. Wipe the atomizer clean of any excess liquid if necessary.
4. Wait a minimum of 10 minutes after filling before vaping
to avoid burning the coil.
CHARGING
1. To charge the built-in battery, insert the provided Bugatti USB-C charging cable into the
charging port on the back of the device.
2. First connect the USB-C cable to the device. The charging port is on the back of the
device.
3. Now connect the USB-C cable to a suitable power source.
4. The charging process will start.
5. While charging the LEDs flash slowly in the selected color. The LED stays illuminated
white after fully charged. Display shows the charging status.
LOCK/UNLOCK DEVICE
1. The ELITE device has the added functionality of locking for child protection. When
locked the device cannot be activated.
2. To lock the device, simply press the button 5 times, the device cannot be activated.
The LED will light up gradually and blink 1 time.
3. To unlock the device, press the button 5 times, the device can now be activated. The
LED will light up gradually and blink 3 times.
INJECTION HOLE