Assembly Instructions - Insignia NS-HWG1655E Mode D'emploi

ASSEMBLY INSTRUCTIONS

Step 1: Preparing the top, bottom, side panels, and front
Caution: Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
• Screw 29 cam screws (1) into the holes in the top (A), bottom (G), sides panels (B and C), and front (H),
then tighten with a phillips screw driver until the smooth portion of the cam screw is flush with the
surface of the part. Use the holes indicated.
You'll need:
6
Phillips screwdriver
www.insigniaproducts.com
55" Wood Finish TV Stand
1 Cam screw (29)