Additional Information - Intellinet Network Solutions GUESTGATE MKII Guide D'installation

Testing Internet Access
Start a PC or Notebook, which is connected to one of the guest ports, and
launch a Web browser. Then open a Web site such as
http://www.intellinet-network.com.
If GuestGate has Internet access, you will see GuestGate's welcome page.
Click "continue" and you will then be forwarded to the Web page you originally
entered in the Web browser's address bar.
Accessing the Administrator Web Interface from the Host
Network
Access to the Web administrator interface is only possible when connecting to
GuestGate via the Host port.
Connect to the router (DHCP Server) in your network and open the DHCP client
log of the router. Connect GuestGate's Host port to one of the router's LAN
ports and power-on GuestGate. Wait about 30 seconds, and then refresh the
DHCP client log in the router. The last entry (the newest) belongs to GuestGate.
Launch your Web browser and open the IP address shown in the DHCP client
log. You will then see the Administrator Web interface.
The default password is 1234.
If this procedure does not work you can configure your PC with a static IP
address of 192.168.2.xxx, disconnect GuestGate from the router and connect
your computer directly to the host port. Power-on GuestGate and wait about
one minute, then open GuestGate's default IP address http://192.168.2.1 with
the Web browser.

Additional Information

For additional information about the installation process, the configuration and
functions of GuestGate, please refer to the user manual on the INTELLINET
installation CD.
- 5 -