Preventative Maintenance - MAC TOOLS ES1000G Manuel D'opération

PREVENTATIVE MAINTENANCE

WARNING
Failure to follow these Preventative Maintenance instructions may result in serious injury or death, and/or property damage.
1. Always store the engine stand in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust, or any other
harmful elements. The stand must be cleaned of water, snow, sand, grit, oil, grease and other foreign matter before using.
2. Lubricate the wheels, casters, zerk fittings, gear and rotating shaft with a general purpose grease.
3. Every stand owner is responsible for keeping the device labels clean and readable. Use a mild soap solution to wash external surfaces of the device.
Contact Mac Tools for a replacement label if the device's label is not readable.
INSPECTION
WARNING
Failure to follow these Inspection instructions may result in serious injury or death, and/or property damage.
Visual inspection should be made before each use of the engine stand, checking for damaged, loose or missing parts. Each engine stand must be inspected by
a manufacturer's repair facility immediately if subjected to an abnormal load or shock. Any engine stand which appears to be damaged in any way, is found to
be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made by a manufacturer's authorized repair facility.
It is recommended that an annual inspection of the stand be made by a manufacturer's authorized repair facility and that any defective parts, decals or
warning labels be replaced with manufacturer's specified parts. A list of authorized repair facilities is available from the manufacturer.
ES1000G
ES1000G
1000-LBS.
GEARED ENGINE STAND
4
CAPACITY
5/13/16