OSP 84225 Instructions De Montage

ÉTAPE 1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les
quantités des pièces sont correctes.
ÉTAPE 1 Sécurisez le cadre (2) à la surface (1) avec huit vis en bois (5). SERREZ TOUTES LES VIS POUR LE BOIS (5) COMME IL FAUT AVEC UN TOURNEVIS
PHILLIPS (non fourni).
ÉTAPE 2 Introduisez les pattes de cadre (3L et 3R) dans le cadre (2) et sécurisez-les avec deux boulons avec rondelles (6) pour chaque patte de cadre (3).
SERREZ TOUS LES BOULONS AVEC RONDELLES (6) COMME IL FAUT AVEC LA CLÉ ALLEN (7). Introduisez deux roulettes (4) dans chaque patte (3), poussez
très fort jusqu'à ce que vous sentiez ou écoutiez la roulette (4) rentrer à sa place.
ATTENTION : TOUS LES BOULONS ET TOUTES LES VIS DOIVENT ÊTRE BIEN SERRÉS AVANT D'UTILISER LA TABLE.
84225 / 84226
TABLES DE FORMATION
INSTRUCTIONS DE MONTAGE
PIèCE
1. Surface . . . . . . . . . . . . . . . . . . . . . 1
2. Cadre . . . . . . . . . . . . . . . . . . . . . . . 1
5
3. Pattes de cadre (3L & 3R) . . . . . . . 2
4. Roulettes . . . . . . . . . . . . . . . . . . . . 4
5. Vis en bois . . . . . . . . . . . . . . . . . . . 8
1
6. Boulons avec rondelles . . . . . . . . . 4
7. Clé Allen (non montré) . . . . . . . . . . 1
Le Tourne-a-vis de Phillips est aussi besoin pour
l'assemblage (non fourni)
ÉTAPE 2
2
3R
2
QTÉ
4
3L
OSP FURNITURE TRAINING TABLES LIMITED WARRANTY
OSP Training Table Series is warranted* from date of purchase against failure due to material and workmanship as follows:
• Laminate finishes are covered for a period of 5 years.
• Lifetime on component parts including control mechanism, frame and casters.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
© Office Star Products Mars 2012
84225 / 84226
TRAINING TABLES
OPERATING INSTRUCTIONS
FEATURES
• FLIP TOP ADJUSTMENT
To flip top up or down, lift either lever, flip top up or
down and relase lever to lock into place.
WARNING
1. Use this product for it's intended purpose.
2. Do not use this table unless all screws and bolts
are securely tightened.
3. Check that all screws and bolts are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
5. Do not use table as a stepladder.
Scan the QR code to watch an
assembly video of this product